Produced specifically
for Team Brooks's participation in L'eroica, Brooks
woollen jersey is inspired by the original designs
of the 1960's and 70's and features embroidered logos,
a metal zip, and three buttoned rear pockets. It is
manufactured in Italy using only the finest quality
wools. Medium, XL out of stock
Produced specifically
for Team Brooks's participation in L'eroica, Brooks
woollen jersey is inspired by the original designs
of the 1960's and 70's and features embroidered logos,
a metal zip, and three buttoned rear pockets. It is
manufactured in Italy using only the finest quality
wools. Small, Medium out of stock
Produced specifically
for Team Brooks's participation in L'eroica, Brooks
woollen jersey is inspired by the original designs
of the 1960's and 70's and features embroidered logos,
a metal zip, and three buttoned rear pockets. It is
manufactured in Italy using only the finest quality
wools. Small, M, L, XXL out of stock
This cushy bar tape is not quite honey colored, but pretty close.
Colors: almost honey, black - out of stock
$13
BROOKS cork/wood BAR PLUGS
Brooks cork bar plugs with a wooden head.
These are the plugs that are supplied with the Brooks leather bar tape.
There are probably lots of interesting ways to finish the wood.
$12pr - out of stock
BROOKS
LEATHER MUDFLAP
A Brooks
Leather Mudflap can make a difference
when it comes to the little details that make your
bike look more elegant. Another perfect compliment
to your Brooks Saddle.
Colors: Antique Brown, Black and Honey -
$30 - Honey, Antique Brown out of stock
BROOKS
WHEEL KIT
BROOKS
WHEEL KIT 3 Steel
Tyre Levers used to remove the tire from the rim
1 Steel Spoke Wrench to tension the wheel spokes
"Bottom wire and backplate" for
the B.72. The rails and the 'C' shaped piece that the leather
rivets to in the back. Black enamel. -
$25- out of stock
B.66 Frame
"Frame assembly complete with bridge" for
the B.66. This is the three 'V' shaped pieces riveted together
with the shackle at the nose and with the cross piece bolted
onto the back. Black with chrome bridge and bolts.
$25
B.66 Champion
Frame
"Frame assembly
complete with bridge" for the B.66 Champion. This is the
three 'V' shaped pieces riveted together with the shackle
at the nose and with the cross piece bolted onto the back.
Black with chrome bridge and bolts.
$25
B.66 Champion
'S' Frame
"Frame assembly
complete with bridge" for the B.66 'S' Champion. This is
the three 'V' shaped pieces riveted together with the shackle
at the nose and with the cross piece bolted onto the back.
Black with chrome bridge and bolts.
$25
B.67 and
Champion Flyer Frame
Bottom wire and spring
assembly for B.67 or Champion Flyer saddles. Black with black
springs. (not with chrome springs like newer
B-67s)
$30
Conquest
Top Wire (side rod)
$9
Conquest Frame
Bottom wire and spring
assembly for Conquest saddle. Black with black springs.
$20
Swift Frame
Chrome steel
$26
B-66 Back Plate
The piece that the leather rivets to and the
springs bolt to.
note: replacing both coil
springs in a pair at the same time is strongly advised.
A used spring can be weaker than a new spring. This can
result in a lopsided saddle or a broken spring.
Chrome coil,
LH or RH
B.66, B67, B.67S, B.73 rear
$11
Chrome coil
B.73 front
$11
Black coil, LH or RH
Flyer,
Flyer S
$7
Chrome double-wound coil
B.33 rear, L or R
$10- out of stock
Nut
For bolting
the spring to the backplate on coil spring models. - out
of stock
Small-hole Seat Sandwich for mounting two-rail saddles
such as the B 72, B 66, B 73 and B 135 on single-rail type
micro-adjust, single-bolt, seat post. Includes extra long bolt.
$15
P Clampscan
help mount racks where fittings are not incorporated into the
bike. All clamps are sold as pictured.
$1.50 pair
$2.50 pair
ORDER by
PHONE at 888 731 3537 or print out our ORDER
FORM to MAIL or FAX your wishes to us.
