|
For
SHIPPING to HAWAII, ALASKA, CANADA and INTERNATIONAL -
PLEASE CLICK HERE |
| THE TUBUS CARGO RACK |
The CARGO
rack is made in Germany by Tubus. Constructed
of steel tubing, it weighs 580g and its capacity is 90 lb.
The versatile stay struts
enable easy mounting to any 700c bike with
threaded mounts on the inside of the seatstays.
Triangulation of the struts ensures excellent
rigidity.
Construction on this product is beautiful
and the powdercoated finish should prove
durable. The full-width reflector mount
is a welcome change from the usual clip-on
afterthought.
 Cargo
dimensions |
|
Models for 700c and 26" bikes.
(Neither light nor reflector are included) |
|
| *Tubus now has an English speaking website.
All links have been updated. |
| OTHER TUBUS RACKS |
| TARA lowrider
front rack - out of stock |
$100 |
|
| DUO lowrider
front rack |
$100 |
|
| NOVA lowrider
front rack - NEW -
All the benefits of a Tubus lowrider design similar to the Tara,
but in stainless steel. |
$160 |
|
| FLY small
rear rack |
$100 |
|
VEGA rear
rack - NEW - based on the Logo,
but has no lower side-tubes; close to the Fly, but has the
conventional two seat stay attaching struts. Fits 26" or
700c wheels. - out of stock |
$110 |
|
| LOGO rear
rack - One
size works on either 26" or 700c
wheels. |
$120 |
|
SWING carrier
for suspension forks |
$160 |
|
| LUNA small stainless
rear rack |
$160 |
|
| COSMO big
stainless rear rack |
$170 |
|
|
| TUBUS
SPARE PARTS |
| Busch
and Muller DToplight
permanent - a
battery powered luggage carrier rear light that
uses four super bright LEDs (two in middle and two on sides). Battery
power indicator and
a reliable
mechanical on/off switch at the base of the rear light.
Works with the Vega, Logo, Cargo, Cosmo, and Fly - out of stock |
$27
|
|
| Roundstay cranked
(bent) 5mm, 8mm, or 12mm if you have to pass around brake cables
or other parts between the frame and the rack. Available in
190mm length only - sold as pair |
$15pr |
|
| Roundstay 8mm pair of stays, length 190mm - connects the rack
with the rear frame, bend to your needs |
$12pr |
|
| Roundstay 8mm single stay,
length 350mm - connects the rack with the rear frame, bend
to your needs - out of stock |
$7.50 |
|
| Clamping bolt for Roundstay - connects above roundstays to
the roundstay holder |
$7.50 |
|
| Roundstay holder for rear racks- connects above clamping bolt
with the rack |
$7.50 |
|
| Clamp-set for seatstay-mounting
- replaces eylets or mounting bosses on the seatstays |
$7.50 |
|
| Extension set for rear racks
- extends the distance between the rear wheel and the rack
|
$13 |
|
| LM-1 for the Tara Rack, for
forks not fitted with lowrider eyelets, for tubing up to 32mm
|
$19 |
|
| LM-BF for the Tara Rack,
for forks not fitted with lowider eyelets, for tubing 25-40mm
- out of stock |
$6 |
|
- P
Clamps can help mount racks where fittings are not incorporated
into the bike. All clamps are sold as pictured. |
$1.50 pair |
|
$2.50 pair |
|
|
| |
 ORDER by
PHONE at 888 731 3537 or print out our ORDER
FORM to MAIL or FAX your wishes to us. |
SHIPPING INFO- HAWAII, ALASKA,
CANADA - If you want to make a purchase
using PayPal, for shipping to these places click the "add
to cart" button below to add the additional shipping cost
of $9.00 for shipping to Alaska and Hawaii or $13.00
for Canada. This is the best we could do on the
PayPal system. If you would like us to fine-tune charges
by packing and weighing your order, please email us,
and we will give you a quote. Also, for
INTERNATIONAL ORDERS to other countries besides Canada,
please contact us for a quote.
| For
Alaska and Hawaii |
$9 |
|
| For Canada |
$13 |
|
"The eight-day trip I wanted the duo rack for has been completed and the rack has been superb.
It mounted easily and is astonishingly stiff and stable once bolted up.
I dug up my Ortlieb 10mm mounting inserts in the end and they fit the bars of the rack perfectly - it is a mild interference fit, a snap-fit in other words.
The only consideration with fitting is that my mid-fork mounts are threadless tubes which require a through-bolt, where Tubus seems to have assumed the mounts will be threaded on each side and did not supply through-bolts. No problem though as I had bolts from mounting a different rack there in the past.
The bar that carries the pannier extends back past the fork blade, meaning the bags can be beautifully balanced around the steering axis and have a negligible effect on the bike's steering in touring use.
All in all, I am a very satisfied customer. Thanks again."
|
|
|
